Reverse Osmosis System

The reverse osmosis systems are equipped with high-quality components; thanks to that, they remove from the water the dissolved salts and represent an insurmountable barrier for organic substances, micro-pollutants, pesticides, bacteria and viruses.

 

 

Features:

 

Pure water, always available

• Free of salts and harmful substances

• Very low using cost: from 1-2 eurocent per litre

• Easy to use

• Environmentally friendly

• Works without electricity and without chemical additives

• Does not require a pump, uses only the pressure of the water supply

 

Reverse osmosis is a technology that takes advantage of the ability of ce

rtain semi-permeable membranes to separate dissolved substances from water.

The pressure of the water supply forces the water through the membrane; the pure water (filtered) is so separated from the water containing dissolved salts (concentrate).

The highest-performing osmotic membranes (those made of polyamide and polysulphone) act as a barrier not only against salts and other inorganic substances, but also against organic substances with molecular weight higher than 100; therefore they are constitute an excellent defence against micro pollutants, pesticides, pyrogenic materials, viruses and bacteria that may be contained in water.

This technology has been available only recently for water treatment but has quickly proved its worth, and in a short time has been widely adopted thanks to its versatility, excellent performance, and ease of use.

 

Technical Data

Osmotic water – residual water     Systems are set to the ideal tested ratio of 1 to 4

Operating pressure                      3 – 8 bar

Temperature                               1 – 30°C

Membrane material                      Polyamide/Polysulphone TFM

Salt retention rate                        98 – 99%

Value for treated water                 10 – 40 micro-siemens

 

 

 

RO Basic

 

Components:

  • Active Carbon cartridge
  • Osmotic Membrane with capacity of 50 / 75 / 100 gallons per day (1 gallon = 3,785 litres)

 

 



RO Classic

 

Components:

  • Sediment cartridge
  • Active Carbon cartridge
  • Osmotic Membrane with capacity of 50 / 75 / 100 gallons per day (1 gallon = 3,785 litres)

 

 



RO FV

RO Classic with Flushing Valve

 

Components:

  • Sediment cartridge
  • Active Carbon cartridge
  • Osmotic Membrane with capacity of 50 / 75 / 100 gallons per day (1 gallon = 3,785 litres)
  • Flushing Valve

 

 



RO NPS

Ro Classic with NO3-PO4SiO2 filter

 

Components:

  • Sediment cartridge
  • Active Carbon cartridge
  • Osmotic Membrane with capacity of 50 / 75 / 100 gallons per day (1 gallon = 3,785 litres)
  • Filter NO3 - PO4 - SiO2

 

 



OSMO FVM  with2 Filters 10"

+ FLUSCHING VALVE and MANOMETER

 

OSMO50 membrane 50 GLD - 189 l/d*  -  reali 4 l/h  -  96 l/d  

OSMO100 membrane 100 GLD - 378 l/d*  -  reali 8 l/h  -  192 l/d

OSMO200 membrane 200 GLD - 756 l/d* - reale 16 l/h  - 384 l/d

OSMO300 membrane 300 GLD - 1134 l/d* - reale 24 l/h - 576 l/d

OSMO400 membrane 400 GLD - 1512 l/d* - reale 32 l/h - 768 l/d

OSMO500 membrane 500 GLD - 1890 l/d* - reale 40 l/h - 960 l/d

 

Components:

  • Sediments Filter  9” ¾    5 micron
  • Carbon Block Filter 9” ¾
  • Osmotic Membrane (1 gld = 3,785 lt)
  • Manometer
  • Flusching Valve

 

 

 

OSMO with 3 Filters 10"

 

OSMO53 membrane 50 GLD  189 l/d - reali 4 l/h  -  96 l/d

OSMO103 membrane 100 GLD  378 l/d - reali 8 l/h  -  192 l/d

OSMO203 membrane 200 GLD  756 l/d - reale 16 l/h  - 384 l/d

OSMO303 membrane 300 GLD  1134 l/d - reale 24 l/h - 576 l/d

OSMO403 membrane 400 GLD  1512 l/d - reale 32 l/h - 768 l/d

OSMO503 membrane 500 GLD  1890 l/d - reale 40 l/h - 960 l/d

 

Componenst:

  • Sediments Filter  9” ¾    5 micron
  • 2 x Carbon Block Filters 9” ¾
  • Osmotic Membrane (1 gld = 3,785 lt)

 

 

 

OSMO NPS with 2 Filters 10" + NO3PO4SiO2 Filter

 

OSMP50 membrane 50 GLD - 189 l/d  -  reali 4 l/h  -  96 l/d  

OSMP100 membrane 100 GLD - 378 l/d  -  reali 8 l/h  -  192 l/d

OSMP200 membrane 200 GLD - 756 l/d - reale 16 l/h  - 384 l/d 

OSMP300 membrane 300 GLD - 1134 l/d - reale 24 l/h - 576 l/d

OSMP400 membrane 400 GLD - 1512 l/d - reale 32 l/h - 768 l/d 

OSMP500 membrane 500 GLD - 1890 l/d - reale 40 l/h - 960 l/d

 

Componenst:

  • Sediments Filter  9” ¾    5 micron
  • Carbon Block Filter 9” ¾
  • Osmotic Membrane (1 gld = 3,785 lt)
  • NO3PO4SiO2 Filter

 

 

 

OSMO 20” with 2 Filters 20”

 

OSMO50 20 membrane 50 GLD - 189 l/d*  -  reali 4 l/h  -  96 l/d          

OSMO100 20 membrane 100 GLD - 378 l/d*  -  reali 8 l/h  -  192 l/d

OSMO200 20 membrane 200 GLD - 756 l/d* - reale 16 l/h  - 384 l/d

OSMO300 20 membrane 300 GLD - 1134 l/d* - reale 24 l/h - 576 l/d

OSMO400 20 membrane 400 GLD - 1512 l/d* - reale 32 l/h - 768 l/d 

OSMO500 20 membrane 500 GLD - 1890 l/d* - reale 40 l/h - 960 l/d

 

Componenst:

  • Sediments Filter  20”    5 micron
  • Carbon Block Filter  20”
  • Osmotic Membrane (1 gld = 3,785 lt)

 

 

 

OSMO with 3 Filters 20”

with FLUSCHING VALVE and MANOMETER

 

OSMO320 membrane 300 GLD - 1134 l/d* - reale 24 l/h - 576 l/d

OSMO620 2 membranes 300 GLD - 2268 l/d* - reale 48 l/h - 1152 l/d

OSMO420 membrane 400 GLD - 1512 l/d* - reale 32 l/h - 768 l/d 

OSMO820 2 membrane 400 GLD - 3020 l/d* - reale 64 l/h - 1536 l/d 

OSMO520 membrane 500 GLD - 1890 l/d* - reale 40 l/h - 960 l/d

OSMO1020 2 membranes 500 GLD - 3780 l/d* - reale 80 l/h - 1920 l/d

 

Componenst:

  • Sediments Filter  20”    5 micron
  • Carbon Block Filter  20”
  • Osmotic Membrane (1 gld = 3,785 lt)

 

 

 

Instructions for proper assembly and use of Osmosis Systems

Post Osmosis Filter

with NO3-PO4-SiO2 Removal A

 

To be used every time that there is an unusually high concentration of nitrate, phosphate and silicate in the water supply that the osmotic membrane can not totally retain. NO3 – PO4 – SiO2 Removal A – filtering material specifically – and only – made for the post reverse osmosis filter – effectively retains nitrate, phosphate and silica.

 

 

 

Removal A

Recharging for Post Osmosis Filter

 

The osmotic membrane cannot totallyretain unusually high concentrations of nitrate, phosphate and silica in the water supply.

NO3 – PO4 – SiO2 Removal A – filtering material especially – and only – made for the post reverse osmosis filter - effectively retains nitrate, phosphate and silica.

Removal A keeps the water pure, the fish healthy and the seaweeds under control.

 

ml 1000

 

 


Scoprite di più su Aquili On Line navigando nel nostro nuovo sito web. Stiamo lavorando per rendervi sempre piu appagati coi servizi e prodotti Aquili.

Tutte le NOVITA'!



Ci potete contattare allo:

tel. +39.071.740 640

 

Potete usare anche il

nostro modulo online.

GAMMA PRODOTTI